There is a slew of common plumbing issues homeowners need to prepared for. From minor to major problems, you can take steps to prevent these issues in the future with the help of an experienced plumber. Here are a few of the problems and a bit of advice on how they can be fixed. 

You have dripping faucets

This isn’t just annoying; it’s wasteful too. Imagine your water running all night because of a dripping faucet. Left unresolved, that drill will turn into a bigger leak. It could lead to a considerable increase in your water bill. Sometimes, it’s as easy as tightening handle or replacing the faucet. If you don’t have the proper tools and knowledge, though, hire a pro. Look for a seasoned service technician to deal with the Plumbing Surprise in your AZ home. 

You have a slow-draining sink

If your sink takes a long time before it drains, that’s a problem. Don’t dismiss that, thinking it’ll go away on its own. A slow-draining sink is an indication that there’s a blockage in your pipes. If the problem is with your bathroom sink, then it could be clumps of soap and knotted hair. If the problem is with your kitchen sink, it may be leftover food bits. You can use a plunger and pour down a mixture of baking soda and vinegar. A chemical clog remover works too. However, using these solutions could hurt your pipes. Talk to a professional to find out how to best unclog your sink drain. 

You have a clogged bath

If your bath and shower areas take a long time to drain as well, that means more blockage.

You can use a suction pad. One tip: add a little of petroleum jelly to the edge of the pad to make for a better seal. Is there enough water in the shower? Add some more until the end of the plunger is submerged. Plunge until you see results. Dealing with a clogged bath and shower drain, though, takes time. If you’re dealing with these problems, you’ll have a much easier time if you call a plumber for help. 

You have a running toilet

A running toilet can lead to as much as 200 gallons in wasted water every day. Check to determine the problem. If it’s a faulty flapper, replace it. You can also look for repair kits from hardware stores. In some cases, though, the problem may be the result of sediment that compromises the flushing and filling functions of the tank. If that’s the case, call a plumber. 

You have a problematic heater

If your water heater isn’t working, the failure could be due to multiple reasons, whether it’s a sediment buildup in the tank or the thermostat. Getting a qualified plumber to inspect and fix your system will ensure speedy and efficient results. 

You have low water pressure

Leaking pipes could be the culprit behind the problem. A buildup of sediment on aerators could also be a factor. Find out when you call a plumber to check it out.