This Busch Jager potentiometer 2112U-102 is suitable for supplying electronic ballasts with a 0-10V control voltage. This potentiometer provides a perfect control voltage for our Meanwell series NPF nnD-12 dimmable transformers. This results in a very even dimming curve for LED strips. It is very easy to switch off the transformer completely, even with only this control voltage, except for an open load that is less than 0.5 Watt.

The maximum load on the 0-10V connection is 50 mA. This allows you to simultaneously control several NPF transformers, eg this NPF-40D-12 .

We supply this potentiometer without any cover plate/knob or including rotary knob and cover plate (you can choose between alpine white matt (RAL9010) and cream glossy (RAL1013) from the Reflex SI series), so that it can be neatly built into the wall recessed box. We also have double cover plates in the range at an additional cost of € 1.50.

Please note:  knobs and cover plates from other brands such as Jung, Berker, Gira, Merten etc. do not fit on this potentiometer, because this potentiometer has a shaft diameter of 6 mm and almost all other brands use a 4 mm shaft diameter. If you return this potentiometer for this reason, you will not be reimbursed for the return shipping costs.

Install the potentiometer first without tightening the screws. If the potentiometer unexpectedly does not dim your lamps properly, the potentiometer is still in its original condition and you can return it. 

Read the manual of this 2112U-101 potentiometer here .

pLEDshop gives a satisfaction guarantee of 1 month (not satisfied, money back) and a guarantee of 2 years!

Visit us: https://www.topledshop.nl/Dimmers-voor-LED-verlichting/Busch-Jaeger-Potentiometer-0-10V.html