A washing machine tap, often a typical plumbing fixture, plays a vital role in attaching your washing machine to the water supply. Its threaded inlet and outlet pipes provide a seamless connection, making it an important component in any sanitary installation.
Materials:
The majority of washing machine taps are constructed from chrome-plated brass. This material choice is primarily due to the tap's minimal exposure to moisture.
Threading
Tap for washing machine comes with male fittings featuring 20 x 21 mm threading, which corresponds to a 3/4'' washing machine feed. Some taps may also have a male fitting of 15 x 21 mm (1/2'') for the water inlet pipe. It's crucial to select the appropriate size based on your specific installation requirements.
Faucet Head
Washing machine taps offer two common types of faucet heads: swivel handles and twist knobs. Swivel handles are practical but may become challenging to use over time due to factors like corrosion.
Wall-Mounted Tap: Some washing machine taps are designed to be wall-mounted. When replacing these models, it's essential to inspect the water inlet pipe and consider reinforcing it with Teflon tape, fibers, or joint combination if necessary.
Tap with Integrated Connection Kit: These taps are connected directly to the support and connect to a copper pipe, typically equipped with a female nozzle. If there's a size mismatch, a reducer (a plumbing fitting that modifies one size to another) becomes essential.
Single or Double Outlet Tap: Tap for washing machine comes in single or double outlet configurations. Double tap models have two independent handles, allowing you to control each feed separately.
Tap with Spout: Some models feature a curved spout, functioning like a standard faucet. This design is convenient in spaces such as laundry rooms, garages, and basements.
Self-Cutting Tap: Among the most practical options, self-cutting taps don't require a connection kit. They attach directly to an existing network by screwing into the copper pipe, effectively sealing the tap body and cutting the pipe.
Shut Off the Water Supply: Begin by turning off the water supply to ensure safety during installation.
Attach the Water Inlet Pipe: Connect the end of the washing machine's water inlet pipe to the tap's threading.
Attach the Washing Machine's Connector: Connect the washing machine's connector to that of the tap, using Teflon tape to provide a safe and leak-free stamp.
When buying the materials, always buy from a well-known bathroom fittings manufacturer in delhi to avoid any mishap. For the structure of a self-piercing tap, follow these steps:
Wash the Line Pipe: Confirm the line pipe is pure and free of obstacles.
Reduce Pipe Clamps: Reduce the pipe clamps, letting the pipe be shifted away from the wall.
Attach Flanges: Place the flanges at the desired location and secure them by screwing them in.
Position the Tap: Align the tap, in the closed position, with the flange's threading and screw it in to begin drilling the pipe.
Tighten the Lock Nut: Use a flat wrench to tighten the lock nut, ensuring the tap is securely locked in place.
Connect the Appliance Hose: Finally, connect the tip of the appliance's supply hose to the tap's threading, completing the installation.
