The rate of the biomass pellet assembly line is figured out by the raw materials utilized.
The rate of the biomass pellet production line is figured out by the raw materials utilized. For instance, if the raw materials are branches and trunks with high wetness web content, they must be damaged - crushed - dried out - granulated - stuffed - delivered. It mostly depends upon what resources are utilized. 350 type biomass pellet device devices 38,000, design: 350 type 300 ~ 500 kg per hour, 450 kind 500 ~ 800 kg, 560 type 1 ~ 1.5 lots, 600 kind 2 loads, 850 kind 3 ~ 4 heaps.
The great marketing in Indonesia biomass pellet production line rate depends upon your resources and also output dimension. First of all, you require to understand what your raw materials are. The raw products are ready-made sawdust or timber chips as well as the moisture web content of the products is 10%-15%. A factory provided new technology wood pellet device is enough. If your raw materials are unrefined logs, branches, etc require to be crushed by a timber chipper and biomass crusher, after that dried in a dryer (if the wetness surpasses 15%, it requires to be dried out), after that the main maker is granulated, and afterwards the packaging device packs this collection of production lines.
Understanding your basic materials is about the outcome. The outcome of the biomass pellet mill maker is different as well as the version is different, so the price is additionally different. The biomass pellet assembly line rate is not only a issue of reporting a number, however it is required to formulate a strategy as well as quote according to your needs.
Related post: RICHI biomass pellet mill
First off, the raw material moisture requirements of timber pellets are extremely strict. The moisture content of the material is too expensive, which obstructs the die holes, to ensure that the fragments can not be produced; if the dampness material of the product is also reduced, if it is as well completely dry, it is challenging to create, and also the viscosity is not nearly enough.
Usually 12%-13%, 15-20% of the raw material dampness after inflection is the requirement for pushing timber pellets. If the raw product moisture is too high, the mold resistance and sliding sensation will occur after the raw material enters the biomass pelletizer ring die; focus on manage the moisture content of the raw product prior to entering the biomass pelleting maker, If the water material is too high, there will be slippage in the ring die, causing the phenomenon that it is not easy to discharge.
Related post: 5T/H wood pellet factory in Austria
If your basic material moisture meets the demands, a biomass timber pellet press equipment can create wood pellets. If it does not meet the requirements, it requires to be dried out, so it needs to be outfitted with a wood dryer as well as a hot blast range. Obviously this is if your raw material is wood chips.
If your resources is timber chips (thickness less than 0.5 mm), it needs to be pulverized, which is equivalent to including an additional process. Some consumers' resources are bark, which is also possible after including a wood pulverizer.
Nevertheless, some customers' resources are timber scraps, because the cost of wood scraps is cheap as well as very easy to get, so there are lots of instances, after that it is required to add a wood chipper, first to cut the non-standard timber scraps right into wood chips, and afterwards most likely to squash.
For some consumers whose raw materials are waste building templates, it is essential to transform the timber chipper to a bamboo plywood crusher.
For more: Richi Machinery
Because the bamboo plywood itself has several iron nails, it is very easy to damage the blade on the timber chipper when using a wood chipper. An additional reason is that the waste structure theme is relatively vast, as well as the feed port of the timber chipper is generally 1250px.
It is difficult to by hand damage it in advance, right? The bamboo plywood crusher can enter any bamboo plywood with a feed opening of less than 1.25 m, as well as the gnawing knife of the bamboo plywood crusher is an ingot knife, and also the iron nails have little result on him.
Unlike timber chippers, the blades are quickly harmed. Bamboo plywood is also an benefit of making timber pellets. Generally, its wetness material is extremely small, in between 15-20%. Consequently, using bamboo plywood as pellets conserves the difficulty of wood drying out makers.
More projects:
20T/H Livestock Pig Poultry Chicken Manure Bio-Organic Fertilizer Production Line
40,000 Tons Biomass Energy Wood Pellet Plant
6TPH Fuel Biomass Pellet Plant
Customized 3 Tons Per Hour Sawdust Pellet Production Line
Annual Production Of 4000 Tons Wood Pellet Manufacturing Plant In China
Heavy Duty 22-23T/H Industrial Straw Wood Pelleting Plant
600-700KG/H Biomass Sawdust Pellet Plant
7.5T/H Organic Fertilizer Production Plant
An Annual Output Of 50000 Tons Organic Fertilizer Company In China
Big Capacity Bio-Organic Fertilizer Manufacturing Plant
6T/H China Factory Price Straw Wood Pellet Processing Plant For Biomass Fuel Pellets
Small 1.2TPH Wood Pellet Plant For Pelletizing Wood Sawdust
Annual Output Of 4406 Tons Organic Fertilizer Company
6T/H Biomass Wood Pellet Mill Plant
13-14T/H Industrial Wood Pellet Plant
2500 Tons Per Month Wood Pellet Factory
1-1.2T/H Wood Chip Pellet Mill Plant
11-12T/H Biomass Agri Green Tree Wood Pelleting Plant
9-10T/H Biomass Wood Pellet Mill Plant
