Each client needs a perfect performance while using the printer device. According to the interest of clients, the Brother printer provides a satisfying work involvement in the printers. Brothers release the wireless printers to change the strategy for client’s printing procedures on their system. In Early Days, it was a too tough work to take a print from the printers. Some new systems and updates are started by the Brothers organization to make your life simple and easy. What’s more, presently, they make it conceivable with a Wireless printer, you can get a print effectively from a specific saved area. Brother printer is one of the most using printers in the world.

But while using the printer, an error can happen. The Error TS-02 is one of the common recognized error happens when the WLAN access point/switch can’t be verified with the MAC address of the Brother Printer which is allowed in the channel. The Brother Printer Error Code TS-02 notifying that the WLAN access point/switch can’t be fetched by the system. This error happens while the user trying to connect the printer to the system or another device.

Why Brother Printer Error Code TS-02 Occur?.

There are various reasons for the Brother Printer Error Code TS-02. Some of the normal causes are the following:

• It can happen because the window file system is damaged.
• System files entries are corrupted
• Incomplete installation or uninstallation of the printer.
• Not proper driver or hardware found.

At the point when the error occurred then watch out for the track to find where and when the errors happen. This will help you in the brother printer troubleshooting the issue by the time-saving method.

Steps to Fix Brother Printer Error Code TS-02:

Below are the solution given to fix the Brother Printer Error Code TS-02. Follow these steps to resolve the printer issue.

Step-1: First, you have to check the WLAN access point/router is Powered.

Step-2: After that connect with the Internet connection with an inbuilt wireless LAN to check that the WLAN access point/router is working fine.

Step-3: After that, move the printer to a barrier-free location or put nearest to the WLAN access point/router to get better connectivity of the network.

Step-4: Then, you have to “Run” the temporary location of your printer within the 1 meter or 3.3 feet from the network or WLAN access point.

Step-5: If the WLAN access point/router is satisfying the MAC address COMPUTING, then make sure that the MAC address of the Brother printer is allowed in the filter.

Step-6: Please be sure that your Brother printer is using radio signals in the 4 GHz range. And if your network or system is using the 5 GHz range then the brother printer TS- 02 error will show on your device.

Step-7:  Go to brother printer control panel and you can also use the Setup Wizard.

Step-8: In another way, you can also do it manually by entering the SSID and security information. So, confirm it by entering all the details in the device.

Step-9: When you have done the process, you have to re-confirm the SSID and security information.

Step-10: When All done restart your Brother printer.

Now, the problem of the brother printer Error Code TS-02 has been resolved. This process is easiest to follow and understand. But if you still trouble with this error or any other error then need not worry you have the best option to contact the Brother Printer phone number The Expert are available 24/7 to help you to resolve your problem and help you in resolving it. For instant help dial Brother printer customer support toll-free number.