On the Speed Trigger, there are various grub screw adjustment points for adjusting pre-travel, over-travel, and the angle of the trigger itself. The trigger is CNC machined in a two-piece form from a solid block of 6061 aluminium. This trigger is both lightweight and durable thanks to its CNC build. The machine work is finished with sandblasting and anodizing, and the trigger has chamfered edges and a textured flat face. https://aztechinnovations.com.au/collections/all?page=3 #V2SpeedTrigger#SpeedTrigger#AdjustableSpeedTrigger
Because it is reciprocating and stiff, the spring retainer is considered a substantial portion of the valvetrain in terms of mass. If you try to thin the retainer to save weight, you may end up with stiffness and increased stress. As a result, the spring retainer's design is given careful study. The spring retainer materials utilized have a variety of consequences. Steel Spring Retainer created by Aztech Innovations with numerous characteristics that will fit all Aztech Scythe gearbox models with the 4 lug locking tab. Visit our website for more details.
Without a doubt, stainless steel is the most endorsed material in the world since it has so many benefits and is both distinctive and long-lasting. Rust and wear cannot penetrate stainless steel. Due to their resistance to rust or corrosion, such corrosion-resistant parts can also be used on machinery or equipment used underwater. Some stainless steel bushes are shipped with grease that has been thoroughly lubricated. This enables them to last for a longer time intact. The bushes are chosen in accordance with the demands and specifications of the sector. Stainless steel bushes offered by AZTECH INNOVATIONS are built from 440-grade stainless steel and have a Rockwell hardness of 60HRC. For further information, please visit our website. https://aztechinnovations.com.au/products/aztech-8mm-low-profile-bushes-440-stainless-v2-gearbox-for-gelball-and-airsoft
