The conveyor has been a device used and cherished throughout the heavy industry. It has recently gone into decline but it has still shown its worth in many categories. This is why we will talk about some of the reasons why you should use conveyors in your constructions.
Most modern conveyor frames have an open surface that allows the area to be more spacious while also helping with hygiene. As stated by F. Moerman and K. Fikiin: “the conveyor system should be designed open enough to allow access for cleaning the belt frame, belt support(s), sprockets, and other frame parts as well as the underside of the conveyor belt.” Low-friction longitudinal wear strips that are fixed on wear strip supports can be perfectly hygienic for use In construction, and it allows for an open conveyor to have improved draining and facilitate the cleaning of the belt.
The process of maintaining a conveyor might be tiresome, but it is quite straightforward and requires low expenses to maintain. By using water you can clean the entire conveyor system. It can be difficult to remove some excess water that has accumulated, but it needs to be done in order to avoid contamination. Special attention should be given to water waste management. The surface of the conveyor has to be supported by a minimum amount of carrying surface in order to reduce excessive wearing and contamination of the belt. It is also used to facilitate the cleaning of the bottom side of the belt. Rollers should be implemented where ever is most practical (this includes line support as it is easily removable when the time for cleaning comes), instead of having a full bed belt support.
These devices use a belt to transfer feed materials through the dryer and are most often used for large industrial projects. They use heated air that passes through under or over them and the product bed before being reheated and then re-circulated. By manipulating the speed of the belt drier, you can roughly regulate when the drying time will be over. Conveyor dehydrators, most of the time, provide higher throughput and are more consistent in producing quality. However, they do require higher investments in comparison to tunnel dehydrators.
Opting for an aluminum conveyor system can reduce the weight of the device dramatically. This means that only a few people (potentially, even just 1 person) are needed to move the device when necessary. Holes in the steel plates under the PVC belt also have advantages. They cool the device and the belt while also ensuring that the machinery can somewhat clean itself during an operation. It also makes cleaning duty easier as the accumulated dirt under the belt will fall through the holes in the conveyor and exit through the open sides.
Conveyor systems for construction will undoubtedly greatly contribute to the efficiency of the projects, but they don’t come cheap. The starting price of a conveyor system can scale from several hundred thousand dollars up to the millions depending on several factors:
There is also the factor of restructuring your warehouse to accommodate the conveyor system.
Most new generation conveyor systems are highly energy efficient which results in very little upkeep expenses. Stainless steel is a more expensive option but it will save you a huge amount down the line. It offers a large ROI due to its nature. It requires very little maintenance and offers high environmental compatibility such as immunity to high heat and being able to withstand chemical exposure. Depending on the model, they might require to clean out ports. Removable carry way components and belt lifts are also conveyor products you can consider. For more detailed information, visit BBCP for conveyor products and solutions.
There are a lot of weird serial connections to belt conveyors, but it allows for people to get innovative. Especially in construction, where both space and safety are of vital importance. Conveyors that have serial connections are able to connect themselves to practically anything in order to achieve the goal of moving an object from point A to point B.
Scaffold fittings are also a present element in every conveyor belt. They are located both in the front and in the back and are used alongside other equipment in order to form all types of simple and complex structures for access or to support work.
While it is important to stay on budget and it isn’t realistic to afford the highest-grade conveyor belts, you still shouldn’t go for the cheaper variations, because the newer conveyors with specific modifications can save you a ton of resources down the road. Until next time!
