We have experimented with Different ways to apply spray foam to flat roofing substrates. Tar and gravel, Tpo, Epdm, and modified Bitumen (BUR), but have found that if we apply foam over another substrate that it leaves room for error because the substrate can fail and cause a leak. We only apply foam directly to the wood decking this ensures a watertight bond between the foam and the house The only way for the roof to leak is for there to be a noticeable crack in the foam leading down to a cracking the decking. The advantage of foam is it’s extremely easy to repair and see what needs to be repaired. #flat_roof_repair_albuquerque #foam_roofing_albuquerque
website for more information: https://99restoration.com/foam/
Silicone roof coatings are specifically made to be installed over many types of substrates, TPO, EPDM, MODBIT, MODIFIED BITUMAN, BUR MODBIT, FOAM, METAL ROOFING ,AND CONCRETE. Although it is extremely important that in order to apply a silicone roof coating system to any of the mentioned roofs, they must be in good working order and be free from moisture. Even though the surface is dry when there are more than two layers present it is extremely hard to tell if there is moisture with out first doing core samples and extensive investigations. #foam_roofing_albuquerque #tpo_roofing_albuquerque
contact us or visit: https://99restoration.com/coatings/
Foam has been around since the early 1940’s late 1930’s It has been used in various applications and today has a wide variety of uses. Polyurethane Foam is one of the most diverse Products that is used in many applications of home building. We use a 3LB Roofing foam that is denser than the average insulation foam. There have been many forms of foam throughout the years, and it’s always improving. #roofers_in_albuquerque #foam_roofing_albuquerque
visit for more information: https://99restoration.com/foam/
Spray foam flat roofs tend to be some of the longest lasting roof applications on the market today. With silicone roof coatings you could potentially have a 50-year roof. So, when you need roof leak repair and replacement give us a call. We stand behind our products and have found the best roofing material for flat roofs. Roofing Albuquerque is a big task to take on however we are constantly foam roofing Albuquerque homes so that other roofers in Albuquerque will never have to touch our roofs ever again. #roof_repair_albuquerque_nm #flat_roof_repair_albuquerque
contact us or visit: https://99restoration.com/
There are many types of low slope roofing products on the market, they all range in price and effectiveness. Tar has been around for a long time dating all the way back to the Egyptians, tried and true it has had it’s day in the sun. There are many roofing materials that are made from tar and bitumen materials. Modified bitumen is a hot applied or self-adhered rolled roofing that is granulated to protect it from the sun. Life expectancy 10-15 years. Tar and gravel built up roofs are a series of layers of hot tar and tar paper stacked up and then covered with gravel to protect it from the sun. Life expectancy 10-15 years. There are a few others not worth mentioning here. #flat_roof_repair_albuquerque #roofing_contractors_albuquerque
visit for more information: https://99restoration.com/flat-roofs/
Most roofers in Albuquerque only offer the products that they can afford and not necessarily the best roofing products in New Mexico. At 99 Restoration our approach is to apply the concept of what would We install on our own personal flat roof and using the longest lasting roof on the market. When it comes to flat roof repairs and flat roof replacements there is no shortage of designs. We only stick to the best roofer practices on the market and only install the best roofing products available. #roofing_contractors_albuquerque #roofers_in_albuquerque
visit for more information: https://99restoration.com/
Silicone roof coatings are the longest lasting Fluid applied roof coatings in the industry. They have to ability to with stand ponding water and the harmful uv rays from the sun. We apply our coatings to a thickness of 38 wet mils which gives a dry mil of 36. With this thickness it will last well over twenty years and potentially 50 years with proper maintenance and annual inspections. #roofing_albuquerque #roofers_albuquerque
website for more information: https://99restoration.com/coatings/
