Superplasticizer Admixture For Concrete Uses

DYNAMON SR1200

Superplasticiser admixture based on polymer-modified polycarboxylate ether for high-performance concrete mixes with very low water/ cement ratios, high compressive strengths, and long slump retention in hot climates.

RECOMMENDED DOSAGE - 0.5-2.0%

DENSITY (ISO 758)(g/cm3 ) at 25˚C) - 1.06±0.02

pH (ISO 4316) - 5.5 ±1.0

CLASSIFICATION (EN 934-2)

CLASSIFICATION (ASTM C494) - Type G (Water-reducing/ high range/ retarding admixture)

ADVANTAGES 

Dynamon SR1200 is specifically designed to produce high-performance concrete mixes by significantly reducing the water/cement ratio and providing excellent results in extended workability time, particularly in hot climates. In particular, it will enable high early and ultimate compressive strengths. Dynamon SR1200 is also recommended for use with GGBS and tri-blend mixes.

USES 

▪ High-performance concrete where exceptional workability and durability is required

▪ Self-compacting concrete, particularly suitable for heavily reinforced and congested sections

▪ Precast concrete elements where increased early and ultimate strengths are required

▪ Precast and in-situ concrete requiring an exceptionally high level of finishing

▪ Concretes requiring reduced carbon footprint either through lower cement & water contents, and ultimately lower energy input during mixing, pumping, and placing

▪ Fly ash, silica fume, GGBS, and tri-blend concrete mixes

▪ Mass concrete pours with improved cohesion

▪ Piling mixes

▪ Raft foundations

▪ Pouring in hot climates

PACKAGING

Dynamon SR1200 is available in 200 litres drums, 1000 litres IBC containers, and in bulk upon request.

STORAGE

Dynamon SR1200 can be stored for 12 months in sealed containers. Protect from frost and direct sunlight.

Choose Superplasticizer Admixture for Concrete Supplier in Dubai, Mapei from now.