MAPECURE E18

WHERE TO APPLY

To lessen surface cracking and shield newly laid concrete from wind- or sunlight-induced rapid water evaporation.

USE

The coverage of Mapecure E18 is 2-3 m2/liter.

PACKING

Mapecure E18 comes in 200-liter drums and 25-kg pails.

TECHNICAL CHARACTERISTICS

Mapecure E18 is a white water emulsion of special resins which forms an even elastic lm on concrete that is impermeable to water and air. Mapecure E18 provides reliable protection against rapid evaporation of water in concrete, whether exposed to direct sunlight or under severe rapid drying conditions caused by wind, low humidity, or high ambient or concrete temperatures.Mapecure E18 offers the following advantages:

· Improves curing of concrete, enhances hydration process, and provides more durable concrete

· Better development of mechanical strength: the absence of moisture in curing concrete can result in a loss of strength up to 50%

· Better resistance to wear

· Less surface dusting

· Fast and easy application

. Spray application is possible

HOW TO USE

Mapecure E18 should be stirred before use to ensure even dispersal of the pigment. Should be applied to the surface of the concrete after initial evaporation. For industrial paving, Mapecure E18 must be applied after the concrete has started to set. For formed concrete Mapecure E18 must be applied immediately after stripping the formwork, in such cases surface must be damp and not completely dry.

From Mapei buy now this water based concrete curing compound at the best quality for protecting concrete structures such as Industrial floors, · Exterior paving (roads, parking lots) · Airport runways etc.